English (UK)
  • Deutsch
  • English (UK)


Methane (CH4)

For our measurement sensor for determining the concentration of Methane, we offer the following calibration gases.

UsageExplanation
Zero gas This gas is needed for the calibration of the zero point.
Standard test gas The standard test gas is required for calibration / adjustment of the sensor with a two-point calibration. The concentration value corresponds to about two-thirds of the full scale value of the probe up to 50% LEL.
Alarm test gas The alarm test gas is required to verify the alarm levels.

 

Select the measuring range of your probe:

 

0 - 50% LEL

Measuring range
of the probe
GasUsageBottle filling volume (Liter)
34 l58 l110 l
0 - 50% LEL Synthetic air Zero gas Z0A0-L1373 Z0A0-M1373 Z0A0-N1373
2.2 vol% CH4 in air Standard test gas Z0A0-L1164 Z0A0-L1164 Z0A0-N1164
1.25 vol% CH4 in air Alarm test gas Z0A0-L1158 Z0A0-M1158 Z0A0-N1158

0 - 100% LEL

Measuring range
of the probe
GasUsageBottle filling volume (Liter)
34 l58 l110 l
0 - 100% LEL Synthetic air Zero gas Z0A0-L1373 Z0A0-M1373 Z0A0-N1373
2.2 vol% CH4 in air Standard test gas Z0A0-L1164 Z0A0-M1164 Z0A0-N1164
1.25 vol% CH4 in air Alarm test gas Z0A0-L1158 Z0A0-M1158 Z0A0-N1158